Cyrious Report: Formula Drift Round 1 Recap

Drifting season for the Cyrious Garageworks and Scion Canada drift team has returned! I've been looking forward to the beginning of this season all year long, so it was nice to get back behind the wheel of FR-S again!

Over the off season we have made a few improvements to the car to make it faster and more responsive. I was excited to see how we would stack up against the competition at Round 1 of Formula Drift Canada.

Practice was a bit rough for us. We were fighting a random mis-fire problem in the engine, which took the team a while to figure out, so by the time we had that sorted out, there was only enough time for about 3 laps of practice, which didn’t really give us much time to play with the car set up and they weren't my best laps by any means. But on to qualifying we went!

First lap out I messed up and missed my downshift from 4th to 3rd gear in the braking zone, resulting in my car straightening out, zero score. Do or die lap. This time going into this lap I decided I wasn't going to downshift, just keep it in 4th and see what happens. Well, it worked great and we qualified 2nd!

Top 16 was in front of a huge crowd and the weather couldn't have been better! My first battle was against Stephen Van Sleuwen. We had a decent battle and I was able to edge him out and take the win!

On to the top 8. We were to go against Youri Levesque. He's been around for a few years now and has been one of those drivers with potential. I led first, he followed me closely but made a few corrections and drifted at less angle to stay close. When I followed him, I wasn't as close but my line and angle was better. And while I didn’t have any corrections, he was given the win.

Like all race events, we walk away with lessons learned and know where we need to improve for the next one. I will be driving much more aggressive from here on in, I can promise you that. Next round is finally just outside Toronto, so I look forward to seeing all of you local fans at Sunset Speedway on June 25th!

Thanks for the support!

Photography: Jeremy Alan Glover, Formula Drift Canada.

#iMProject16 update with Kenji Sumino, President of GReddy Performance Products

We interview Kenji Sumino, President of GReddy in California and the man behind our bespoke exhaust made for #iMProject16.

The name Kenji Sumino should sound familiar. Not only is he the crew leader of Ken Gushi’s drift team, he’s also a two-time winner of the prestigious Gran Turismo award for Best Asian Import at the SEMA Show for Ken’s FR-S Prototype and most recently, for collaborating with Fast & the Furious star Sung Kang and his “Fugu Z”. When it came down to finding a partner to help build us an exhaust for #iMProject16, we knew Kenji would be our guy. While we had his attention, we decided to ask him about the process at GReddy and his involvement with Scion Racing.

Let’s cover the basics. For some of our readers who may not have heard of you, please introduce yourself and how you got to where you are today.

My Name is Kenji Sumino, President here at GReddy Performance Products, Inc. (GPP). I started working for GPP in 1995 in the Research and Development department. Until 2005, I was in charge of the R&D department, responsible for new product development and building project cars to promote GReddy performance products as the R&D manager. From 2006, I started handling more administrative duties while managing R&D, and in 2008, I became president of GPP. I am still very much involved with product development and also our motorsport program with Scion Racing with Ken Gushi in the Formula D series.

Also, I change tires for Ken at the racetrack… Seriously, I really do…. Hahaha…

So how did GReddy get involved with Scion Racing?

Ever since Toyota introduced the Scion brand back in 2003, we have been involved with Scion building their SEMA display vehicles starting with the Super Street x GReddy turbocharged xB. Our partnership with Scion grew from there and we continued to build SEMA display vehicles for all of the new models (tC and 2nd gen xB) that followed. These projects were all “street car” concepts to promote the lifestyle image targeting the Gen Y consumer.

When the 2nd gen tC was introduced, we got the opportunity to build a “track-inspired street car” for Scion’s 2010 SEMA display car. Originally, there were no plans to race this car, but we recognized the potential of the tC platform and proposed to campaign this car in the Redline Time Attack series. This was the beginning of our involvement with Scion Racing but our eyes were already set on the FR-S. At the same time the 2011 Scion tC was released, Scion introduced the FR-S Concept to the world. We felt that the Time Attack project was the stepping-stone for us to be considered for campaigning the FR-S for the Formula D Series in 2012. We needed to show our capability of preparing a racecar and running a motorsport program. And with a successful season with the tC, and a little bit of luck being at the right place at the right time, we were commissioned to prepare the not yet released FR-S street car that was displayed at the North American FR-S unveiling event in LA and a race prepped FR-S that was debuted at the North American International Auto Show in Detroit in 2012. And the rest, as they say is history.

Well it looks like we caught you at the right time again! We really appreciate you helping us with #iMProject16. Can you share a little bit about how you and your team get started designing an exhaust system?

It's a great pleasure for us to work with #iMProject16! Because we have such close relationship with Scion since its launch, we get excited every time a new Scion vehicle is released, so thank you for the opportunity!

When designing an exhaust system on any car, we look at the factory system spec and layout first and figure out where we can improve for more performance and enhance the sound for a “Sport” exhaust system. Then we figure out the piping and muffler size based on the engine displacement and clearance. The last step is finding a way to make it look as cool as possible from the back.

So what did you decide on for #iMProject16?

We routed the new piping to make it more smooth, and made sure to keep good clearance with the chassis/underbody and other components under the car by using stainless mandrel bent tubing and used less sharper turns for a good flowing system.

Thanks we appreciate the effort! But what we all really want to know, will this add power to the car?

While we were not able to put this car on the dyno to measure the power gains, based on our experience with the normally aspirated system, you’re looking at 3-5% power increase.

Excellent! So tell us, now that you’ve prototyped an exhaust for the iM, can we see a production model to come in the future?

Definitely, we’ve already sent the prototype back to our factory. The first sample is due anytime now and we expect to have the production systems available for sale by late spring.

That’s awesome! Thanks so much for the chat Kenji. We can’t wait to see you, Ken Gushi and the rest of the GReddy team at Formula Drift Canada’s World Round in July. Is there anything else you’d like to add?

Thank you and YES!! We can’t wait to go out to Canada’s in July and have Ken Gushi spray you guys down with champagne from the top of the podium! We’ll see you guys soon!

Catch up on the #iMProject16 build on Instagram, Facebook and Twitter, by following @ScionCanada.

Photography: Josh Chow, Justin Pagtalunan, Takuya TK Akiyama.

Cyrious Report: Season Recap

Formula Drift Canada's biggest round of the year was set to take place at the home of Canadian drifting, the place where it all started for me, Autodrome St.Eustache!

The track is about 30 minutes outside of Montreal, and over 10,000 people came out to watch. The fans are truly the best in the world, very vocal about what they like by cheering loudly or chanting one more time when there is a close run. It's quite an electric feeling at St. Eustache, and one that I look forward to attending each and every year.

Going into this round we decided to freshen up the tune in our 2JZ-powered Scion FR-S, so Sasha from Onpoint Dyno came in and together we were able to get an extra 80lb-ft and 40hp. We also changed our alignment settings to get the maximum amount of mechanical grip possible. The car was as strong as it could be for the weekend.

Practice day was on Saturday. We did a few laps working on our set up, but the rear gearing wasn’t right. I always come to events with 3 differentials with different gear ratios, so we decided to swap the one that was in the car for what we felt was a ratio better suited for the track. Unfortunately we had some problems installing the new differential, so we didn't have a chance to test it out that day but we would be ready for battle the next day!

Qualifying day. The track layout we were running is one of my favorites. Despite the lack of practice the day before, I was confident that we would be able to get the hang of it quickly. We started our second day of practice strong. Our rear end gear choice was spot on! For the rest of the day I pretty much ran the same lap. Placing the car in the same spot every time. My first qualifying lap was pretty good. Typically on the first qualifying lap, I drive with a little bit in reserve and pulled off a good run with a score of 85. On my second lap I went all out and put down probably my best lap of the weekend! That gave me a score of 91 with a final qualifying position of 3rd place!

The competition was set up as a top 32, and our first battle was against Riley Sexsmith. Riley and I are good friends off the track so it was a bit disappointing for both of us that we had to go against each other in the first round. I was to lead first. I ran a lap very similar to my qualifying lap, Riley kept up but made a few small mistakes in the follow position. When we switched positions, I stuck with Riley through the course and was awarded the win. Next up, top 16…

The Top 16 ceremony was pretty cool. I rolled out with my fellow Scion Racing driver Fredric Aasbo. It was my birthday that day as well so the crowd gave me a loud "happy birthday" after my introduction! After the intros were done Fredric and I did tandem donuts while Lisa with Scion Canada rode in my car shooting live on Periscope! You can check out the video below.

In the top 16 I went up against Dean "karnage" Kearney in his Dodge Viper. I led first, and once again ran the same line I had been running all weekend. Dean stuck with me through the entire course until we got to the last clipping point, where he got too close, bumping into me and causing me to spin. When I spun around he proceeded to drive over my right front wheel, damaging my steering. We rushed back to the pits to assess the damage. The steering rack, rack spacer and inner tie rod was bent. The judges declared Dean at fault, so we were given about 25 minutes to fix my car. We scrambled to get it straight, I had a spare inner tie rod and spare steering rack but there was not enough time to do the rack. So we bashed it straight with a hammer the best we could. Time had run out and my car was far from perfect with the front toe being out almost 2 inches, but I wasn’t ready to back down from this battle. I pulled up to the line first and the crowd cheered very loud. I was a bit worried about what my car was going to do in the first corner when we initiated drift, but Dean slowed down a lot more than I expected and I straighten out. I spent the rest of the run trying to catch up. The Judges called for "one more time". But as I drove back to the pits my clutch started to slip really badly. I had hoped it was just over heated and that during the tire change it would cool off enough to do our next run, but it didn’t. The car wouldn't move at all, which meant that our weekend was done.

Overall it was a great event. Everyone was saying it was the best drifting they had ever seen me do and the support and love from the fans made it one of the most memorable weekends of the season. I am really feeling at one with my Scion FR-S and we're only going to get better in the years to come! We’ll be racing again soon and our clutch is out getting rebuilt so it won’t be long before I’ll be sideways again.

Thanks so much for the support!

Speed Academy Adds 100 Horsepower To Their Scion FR-S

The engine in the Speed Academy Scion FR-S has been extremely reliable, having not only survived a turbocharger and nitrous injection prior to Peter and Dave’s involvement, but also having run strong at Targa Newfoundland last year where it finished 3rd in class and 6th overall.

But with another weeklong endurance race on the schedule, this year running the car in the inaugural Ontario1500 event, the Speed Academy team decided to take the precautionary measure of swapping in a low mileage FA20 engine prior to installing a Jackson Racing supercharger kit.

As Dave explained, “For Targa Newfoundland we felt the stock FA20 engine was a perfect fit, since its 200 horsepower would be more than enough for us to run competitively. For Ontario1500, however, we really wanted to boost engine output since we’d be running against some very fast track-prepped machines. After doing a lot of research on forced induction solutions for the FR-S, we settled on the Jackson Racing supercharger kit, which offers what we consider the best combination of reliability and performance.”

The JR kit looks a bit intimidating all laid out on the shop floor prior to installation, but the instructions provided are outstanding and Peter, Dave and their shopmate Ken had the supercharger up and running after about 8 hours of wrenching.

They also installed Jackson Racing’s track engine oil cooler kit, which features a large capacity Sebtrab oil cooler (left) that’s integrated beautifully on a mounting bracket that’s also used for the supercharger’s oil cooler (right). Peter and Ken tested it for leaks (above), and the Speed Academy team is happy to report that oil temps are perfectly controlled by this setup during a recent track test.

But before track testing, Sasha from OnPoint Dyno worked his magic dyno tuning the ECU for the 9 psi of boost pressure the Rotrex supercharger makes at 7,000 RPM.

The end result of the OnPoint custom tune on 94 octane was a rock solid 262 horsepower at the rear wheels. That’s almost 90 wheel horsepower more than the engine produced last year and should make this FR-S a serious contender during Ontario1500.

Engine Swap video:

Supercharger kit install video:

Dyno Tuning video:

Be sure to check out the Speed Academy YouTube video series covering the entire buildup prior to Ontario1500, including the engine swap, Jackson Racing supercharger installation and dyno tuning episodes above.

Speed Academy Gives Their FR-S a JDM Makeover

Peter and Dave from Speed Academy have been hard at work this summer preparing their Scion Racing FR-S to compete in the inaugural Ontario-1500.

Racing on 6 different road courses in Ontario for a week straight in mid September means the Speed Academy FR-S requires equal parts mechanical grip and aerodynamic grip. So although Peter and Dave loved the Zele wing they ran on the car during Targa Newfoundland last year, this year they’ve stepped up to a true GT race wing from highly regarded Japanese aero manufacturer Voltex.

Those funky looking swan neck pedestal mounts aren’t just for looks, they actually clean up airflow on the bottom side of the wing where all the downforce is made (contrary to popular belief, the curve along the bottom surface is what creates downforce on a proper airfoil shaped wing like this Voltex Type 7 GT wing).

You know it’s a serious wing when it comes with a massive carbon fiber backing plate that secures it to the underside of the trunk lid and distributes the load across a very large area.

The boys at Speed Academy did have to trim the underside of the trunk to fit this plate, but the end result is very clean and very strong.

With the wing install completed, it was time to bolt up the new wheels for 2015. Last year they ran forged Volk Race CE28RT wheels in bright red, but this year they’ve decided to change up the look of the car with this stunning set of Advan GT wheels in Titanium Blue. These are also a forged wheel manufactured by Rays Engineering in Japan, so weight has been kept at a minimum and strength at a maximum.

Plus Peter and Dave love how concave the face is on these wheels. Delish!

They’ve changed things up in the tire department, opting to run Toyo Proxes R1R extreme performance summer tires this year. As Dave put it, “We’ve had a lot of racing success on Toyo tires over the years, including 7 race wins in the Canadian Touring Car Championship, so we’re excited to run on the R1R compound for Ontario1500, which perform extremely well in both wet and dry conditions.”

There’s lots more to come from Speed Academy on their FR-S build this summer, including swapping in a low mileage FA20 engine and adding a forced induction kit to it, but in the meantime check out their JDM love-fest video covering all the parts above.

Cyrious Report: Exciting times at Trois-Rivières

For the third round of Formula Drift Canada, the team and I travelled to the famous streets of Trois-Rivières, where people have been racing since 1967! Held over two weeks in August, the Grand Prix Trois-Rivières plays host to multiple series race events that include NASCAR and World RallycrossRX, and for the first time a drifting competition with FD Canada.

The streets of Monaco inspired the track and while on paper it appears to be two turns, it’s actually quite difficult. To start, the track is entirely lined with concrete walls so there is really no margin for error. Secondly, we were only given two 30-minute practice sessions which really didn’t give us any time to make set-up changes so everything had to be pretty good right from the get-go. Luckily, we were able to walk the track the night before the competition, so I was able to get an idea of what I was going to need to do to make every lap of practice count.

My first practice run went great! I felt really comfortable right away with the track, placed the car where it needed to be, and felt really fast throughout the course! We only got one lap in on that 30 minute session because there was a crash, but I felt good about how I did. Next session out I was able to get in two good laps, and I was feeling confident going into the top 16 competition.

Unlike the other FD Canada events this year, there was no qualifying. Instead, they used the championship points to decide the order of the top 16. Also, due to the time constraints of GP3R, there would be no “one more time” calls from the judges so every run really needed to sway the judges in your favour. The top 16 battle was spread out over two days, with the first half held on Friday and the rest of the competition on Saturday.

With me leading the board on championship points, I qualified in first and was paired up with Jo Thiffault. I led first with a good clean lap, but while Jo kept up, he made a few mistakes. On my follow lap, Jo slowed down way more than I expected on entry, causing me to straighten up for a second but I managed to keep up with him for the rest of the run. It was a close call, but the judges gave me the win!

My next battle was against Tomy Boisvert-bellamare. We’ve battled against one another every round of FD Canada so far. Knowing Tom, I knew he was going to give it his all and this was not going to be an easy fight. I led first and did a near perfect run! Tom hung with about two car lengths back but couldn’t close in on me. On my follow lap, I was able to close the gap between him and I and was awarded the win.

On to the final 4! I was up against Martin Langlois, a really good driver that’s pretty aggressive. I led first, did a great lap and Martin stuck with me by about three car lengths only making some minor mistakes. Which meant that my follow lap would have to be perfect. We took off down the straight into the first corner and I mis-shifted, putting it in fifth gear instead of third. Right away Martin gaped me by four car lengths. I tried to make it up but just couldn't close that gap and Martin took the win. I heard that many of you were saying “one more time” on Periscope! I spoke with the judges afterwards and they agree that had it not been for the circumstances, they would have called for one more time.

In the end with my first place qualifying position, I finished the event in third overall! But the day wasn’t done just yet. With the competition out of the way, the top 3 drivers of the event got to do demo runs Vaughn Gittin Jr. and Dean Kearny. Even better, I was lucky enough to take Yves Levesque, the Mayor of Trois-Rivières along for the ride! We had some great tight runs, the Mayor loved it and the crowd went wild!

So after three exciting rounds of FD Canada, I ended up being the top qualified driver going into the final World Round in September back in St-Eustache! I’ve also been told that I am officially FD Canada’s “Drifter of the Year.”

Up next for us is FD Pro2 in Texas. We will be making some changes to our transmission that will hopefully prevent mis-shifts from happening and do a few other little things but overall I have been extremely happy with how my Scion FR-S has been performing this season!

Thanks so much for the support!